Additional Safety Instructions - Parkside PHKSA 12 B3 Originalbetriebsanleitung

d) If used incorrectly, liquid
may leak from the bat-
tery. Avoid contact with
this. In the event of ac-
cidental contact, rinse off
with water. If the liquid gets
into eyes, seek medical assis-
tance. Leaking battery fluid may
cause skin irritations or burns.
e) Do not use damaged or
altered batteries. Damaged
or altered batteries can be un-
predictable and lead to fire,
explosion or risk of injury.
f) Do not expose batteries to
fire or elevated tempera-
tures. Fire or temperatures over
130 °C can cause an explo-
sion.
g) Follow all instructions
for charging and never
charge the battery or the
battery-powered tool
outside the temperature
range stated in the oper-
ating instructions. Incorrect
charging or charging outside
the permitted temperature range
may destroy the battery and in-
crease the risk of fire.
6) SERVICE
a) Have your power tool ser-
viced by a qualified repair
person using only identi-
cal replacement parts. This
will ensure that the safety of the
power tool is maintained.
b) Never repair damaged
batteries. All battery repairs
should be carried out by the
manufacturer or authorised cus-
tomer service centres only.
7) ADDITIONAL SAFETY
INSTRUCTIONS
a) Do not use any accessories that
are not recommended by PARK-
SIDE. This can result in electric
shock or fire.
8) SPECIAL SAFETY
INSTRUCTIONS FOR USING
THE CORDLESS CIRCULAR
SAW
a) Do not use grinding discs.
b) Select the right saw blade
based on the material you
will saw. Saw blades that are
intended for cutting wood or
similar materials must comply
with EN 847-1. Only use the
saw for cutting wood, plastic
and light-weight materials
c) Only use saw blades with
a speed designation that
meets the specified speed
for your appliance or
higher.
d) Only use saw blades with
a diameter of 85 mm cor-
responding to the mar-
kings on the saw blade.
e) Make sure the tips of the
saw teeth do not over-
heat.
f) When sawing plastic,
make sure the plastic does
not melt.
g) Pay attention to the max-
imum cutting depth. (see
technical data)
h) When sawing, wear a
dust mask.
i) Always wear hearing pro-
tection!
GB IE
27