SICK GSE6V Betriebsanleitung Seite 9

8021852 | SICK
Subject to change without notice
Figure: Alignment
2 Sensing range
Observe the application conditions: Adjust the distance between the sender and the
receiver according to the corresponding diagram
ating reserve).
If several through-beam photoelectric sensors which are installed next to one another are
to be used, we recommend swapping the sender/receiver arrangement at every second
through-beam photoelectric sensor and ensuring that there is sufficient distance between
the through-beam photoelectric sensors. By doing this, mutual interference can be pre‐
vented [see figure 3].
Funktionsreserve
1.000
100
10
1
0 2 4
1
Figure 4: sensing range areas
Table 4: Definition of sensing range
1
Sensing range
1
3 Sensitivity setting
[see figure
6 8 10 12 14
Abstand in m
GSE6V
0 ... 15 m
COMMISSIONING
0] (x = sensing range, y = oper‐
16
6
9