Balluff BVS003P Betriebsanleitung Seite 62

BVS SL-_1280Z00-07-000
SMARTCAMERA Lite
No connection to Incorrect configuration of PC -
the camera pos-
NetBIOS name
sible
nnnnnnnnnde) of the smart
camera is not dissolved
No connection to Incorrect configuration of PC -
the camera possi-
NetBIOS name
ble (especially
nnnnnnnnnde) of the smart cam-
with laptops)
era is not dissolved because of a
WiFi connection
28
If you still cannot get an connection to the camera as de-
scribed before, it could be possible, that your PC/laptop
(http://sl-
cannot dissolve the NetBIOS name
nnnnnnnnnde) of the smart camera.
Please check the "Node Type" of your PC:
1. Open the command promt of your system.
2. Enter ipconfig /all.
You will find the entry "Node Type" in "Windows IP
Configuration". Here should be "Hybrid".
Otherwise, change the entry in the following way:
https://msdn.microsoft.com/en-us//li-
brary/cc757386(v=ws.10).aspx
If you still cannot connect to the camera, using Intel net-
work cards, try to install the driver without "Intel PROSet
for Windows Device Manager" and without "Advanced
Network Services" or to deinstall both options.
Because of a WiFi connection, the DNS server of your internet
service provider is used to resolve the NetBIOS name
(http://sl-
(http://sl-nnnnnnnnnde) of the smart camera. The DNS server,
of course, does not know the address
and responds with an error messsage.
Please
1. turn off the WiFi module and
2. reboot the laptop.
Now, you can check, if the camera was resolved using the
Windows shell:
1. Click on the Windows start button and
2. enter cmd.
3. Enter nbtstat -c.
All resolved NetBIOS names will be listed and you should find
the smart camera there:
(http://sl-
http://sl-nnnnnnnnnde