Trouble Shooting - Unold Profi 58255 Bedienungsanleitung

TROUBLE SHOOTING

Fault Reason
E0 No cookware on the plate,
cookware not fitted for
induction, cookware not
placed correctly in the
middle
E1 Power circuit fault
E2 Temperature control fault
E3 Variations of voltage
E4
E5 Too high surface tempera-
ture
E6 Overheating due to fan
fault
E0A/E0B Overheating due to fault
of the temperature sensor
30
Copyright UNOLD AG | www.unold.de
Reaction
Only use cookware approved for
induction cooking with a diameter
of at least 11 cm and max. 18 cm,
Place the cookware in the midld-
le of the respective cooking plate.
Send the appliance to our techni-
cal service for repair.
Send the appliance to our techni-
cal service for repair.
In case of sudden fluctuations of
the voltage cooking is automati-
cally interrupted. After approx.
1 minute cooking is continued.
If the surface temperature is too
high, an acoustic signal is given
and the appliance is shout off au-
tomatically. As soon as the tem-
perature has fallen to the normal
temperature range, cooking can
be restarted.
In order to avoid overheating, we
recommend to use low power or
temperature settings for small
saucepans and medium to high
settings for large saucepans .
As soon as the temperature has
fallen to the normal temperature
range, cooking can be restarted.
Send the appliance to our techni-
cal service for repair.