Replacing/Emptying The Dustbag - Philips FC9160 Bedienungsanleitung

English
14
storage
Slide the tube parts into each other to reduce the tube to its
1
shortest length.
Switch off the appliance and remove the mains plug from the wall
2
socket.
Press the cord rewind button to rewind the mains cord.
3
To store the appliance in upright position, insert the ridge on the
4
nozzle into the storage slot.
Always put the TriActive nozzle in the carpet setting when you
5
store it (brush strip retracted into the nozzle). Also prevent the side
brushes from becoming bent.

Replacing/emptying the dustbag

Always unplug the appliance before you replace the disposable dustbag
or empty the reusable dustbag.
Note: In some cases, the dustbag-full indicator can indicate that the dustbag
is full, even though it is not. This may occur if the pores of the dustbag are
clogged (e.g. when you have vacuumed ashes, ine sand, lime, cement dust and
similar substances) or if something is blocking the nozzle, tube and/or hose.
If the pores of the dustbag are clogged, you have to replace the dustbag, even
if it is not full yet. If the dustbag is not clogged but not full either, something is
blocking the nozzle, tube and/or hose. In this case, do not replace the dustbag
but remove the obstruction.