Philips FC9319 Bedienungsanleitung Seite 8

English
8
nozzles and accessories
1 To connect a nozzle or an accessory to the tube, insert the tube into
the nozzle or accessory and it the spring-loaded lock button into
the opening in the nozzle or accessory ('click').
Note: You can also connect the nozzles and accessories directly to the handgrip
in the same way.
2 To disconnect a nozzle or an accessory from the tube, press the
easy-release button or the spring-loaded lock button (depending on
the type of nozzle or accessory) and pull the nozzle or accessory
out of the tube.
silentseal nozzle
Note: For a silent and powerful cleaning job, always use the SilentSeal nozzle.
The SilentSeal nozzle is a low-noise, multi-purpose nozzle for carpets and
hard loors.
Use the hard loor setting to clean hard loors (for instance tiled,
-
parqueted, laminated and linoleumed looring): push the rocker switch
on top of the nozzle with your foot to make the brush strip come out
of the housing.
- Use the carpet setting to clean carpets: push the rocker switch again to
make the brush strip disappear into the nozzle housing.
Hard loor nozzle (speciic types only)
The hard loor nozzle is designed for gentle cleaning of hard loors.
-
accessories
You can connect the crevice tool (1), the small nozzle (2) or the
1
small brush (3) directly to the handgrip or to the tube.
- Use the crevice tool to clean narrow corners or hard-to-reach places.
Use the small nozzle to clean small areas, e.g. the seats of chairs and
-
sofas.
Use the small brush nozzle to clean computers, bookshelves etc.
-