Zooper ORION Bedienungsanleitung Seite 45

USING THE ORION
Installed in car
Group 2,3 (15-36kg)
positionwith vehicle seatbelt or ISOFIX connector.
1.
Installed in the forward facing position with vehicle seatbelt.
NOTE:
When you use this safety carseat in group2, please remove the 5 - p o i n t
harness, sleep pad and the triangle pad.
First pull out the belt from the belt ALR. Diagonal belt through the same side
of Guidance , lap belt through the same side of Guidance

diagonal belt and lap belt together through another side of Guidance
the tip of the buckle into the vehicle seat buckle with an audible CLICK.
Keep the diagonal belt at the position of shoulder between the
outside of the neck and shoulder (Middle of point A and B).
(see picture a)
(position 2) installed in the rearward facing
A
B
a

Ensure the lap belt is as close
as possible to lower.
Ensure the lap belt on the
pelvis,not on the abdomen.
45
, then pull the
. Lock

www.zooper.de