Technical Data; Cleaning And Storage - Neumann 2045flex Bedienungsanleitung

Technical Data

Internal battery
consumption:
Single-pole phase test
voltage range:
Phase rotation test:
Continuity test:
Battery:
Temperature:
Humidity:
Altitude:
Overvoltage:
Standard:
Pollution:
Protection:

10. Cleaning and storage

Tester does not need any special maintenance if used
according to user manual.
Remove tester from all test points before cleaning.
Use a lightly damp cloth with neutral detergent for
cleaning the instrument. Do not use agressive cleaners or
dissolvants.
Do not expose the instrument to direct sun light, high
temperature and humidity or dewfall.
Remove batteries when the instrument will not be in
use for a long period.
NEUMANN Messgeräte GmbH
Stammersdorfer Straße 60
A-1210 Wien
Telefon: +43 (0)1 / 270 55 54-0
Telefax: +43 (0)1 / 270 18 35
e-Mail: info@neumann-messgeraete.at
Internet: www.neumann-messgeraete.at
20
approx. 80mA
100...1000V AC (50/60Hz)
120...400V earth-to-phase,
AC 50/60Hz
Detection range 0...500kΩ + 50%
3V (IEC LR03 1.5V x 2)
-5...40°C operation; -20...70°C
storage, No condensation
Max 85% RH
up to 2000m
CAT IV 1000V
IEC 61243-3:2014
degree 2
IP 64