Yamaha YDS-150 Benutzerhandbuch Seite 27

Changing Settings with the [Fn] Button
Press specific keys while holding the [Fn] button to perform
settings for the various functions of the instrument.
Basic operations
Use the following procedure to perform settings for each
function.
1
While holding the [Fn] button, press the key to
which the function is assigned. Hold the [Fn] but-
ton until you finish performing settings. If you
release the button, the value at that moment is
set and operation returns to the Voice selection
screen.
Example: Tuning
C5
key
2
While holding the [Fn] button, press VOICE [ ]/
[ ] and select the desired value.
NOTE
• Press both VOICE [ ]/[
restore the value to the factory default.
3
When you have finished selecting a value,
release the [Fn] button.
This will complete the setting and return the operation
to the Voice selection screen.
] buttons simultaneously to
Function
Breath pressure resistance
Determines how much the sound vol-
ume changes in response to the sus-
tained strength of your breath. The
lower the value, the more responsive
the instrument is to your breath
strength.
Breath response
Determines how much the sound vol-
ume changes in response to your initial
breath strength. The higher the value,
the harder you have to initially blow
into the instrument to produce sound.
Key response
Prevents unwanted sounds from being
produced, due to inconsistent timing in
fingering when pressing or releasing
multiple keys simultaneously. The
higher the value, the more unwanted
sounds are suppressed.
Tuning
Adjusts the overall pitch of the instru-
ment. The pitch value is displayed on
the LED screen. You can adjust the
pitch in the range of 427 to 453 Hz in
0.5 Hz steps. The dot in the first digit of
the LED display indicates 0.5 Hz.
Auto power off
Sets the function for automatically
turning the power off. The value is dis-
played on the LED screen.
Bluetooth function on/off
Sets the Bluetooth function on or off.
When Bluetooth is on and headphones
are connected to this instrument, you
can listen to music played on a smart
device or similar device via Bluetooth.
Reverb
Set the reverberation effect. The higher
the number, the greater the effect.
Reverberation is applied only to the
headphone output.
NOTE
• Reverberation does not affect the
AUX IN input or the audio data
received via Bluetooth.
 Turning the Bluetooth function on and pairing
with your smart device
1
Turn the Bluetooth function on.
When it is on, the Bluetooth lamp (
Perform pairing when you want to use Bluetooth Audio.
This operation is not required when connecting to a
dedicated app.
Settings Key
1 to 5 C3
Default: 3
1 to 10 Tc
Default: 5
1 to 20 Ta
Default: 10
427 to 453 (Hz) C5
Default: 440
Off, 5, 10, 15, Tf
30, 60, 120
(minutes)
Default: 30
On, Off Eb
Default: Off
Off, 1 to 5 G#
Default: Off
) will flash slowly.
YDS-150 Owner's Manual
13