Removing Bowl; Inserting Tools; Removing Tools; Attaching Bowl Lid - Bosch MUM 2 Serie Gebrauchsanleitung

The bowl must be positioned
straight and firm on the base unit.

Removing bowl

Lift and remove the bowl.
▶
→ Fig.
6

Inserting tools

Select the tool required.
1.
→ "Overview of tools", Page 33
Press the tool into the main drive
2.
until it engages.
→ Fig.
7
To insert the kneading hook:
3.
Insert the kneading hook with
‒
the protective cap fitted in the
main drive.
Turn the protective cap until the
‒
kneading hook engages fully.
→ Fig.
8
The protective cap
the main drive completely.

Removing tools

Pull the tool completely out of the
▶
drive.
→ Fig.
9

Attaching bowl lid

Requirements
¡ The required tool is used here.
¡ The bowl has been inserted.
¡ The swivel arm is closed.
Press the release button, raise the
1.
swivel arm slightly and hold in
place.
→ Fig.
10
Lift the lid slightly at the front, slide
2.
fully onto the bowl and set down.
→ Fig.
11
The filling shaft must face towards
the front.
must cover
Push the swivel arm down until it
3.
engages.
→ Fig.
12

Removing bowl lid

Press the release button, raise the
1.
swivel arm slightly and hold in
place.
Lift the lid slightly at the front and
2.
pull it out towards the front.
Push the swivel arm up until it en-
3.
gages.

Processing

You can find out everything you need
to know about processing food here.
Recommended speeds
Observe the recommended speeds
for optimum results.
Setting Use
1-2 Stir in and mix ingredients.
3 Knead heavy dough, e.g. yeast
dough.
5-7 Beat and stir ingredients, e.g.
whipped cream.
Briefly beat and stirr ingredients at
maximum speed.
→ "Using instantaneous switch-
ing", Page 36
Processing ingredients with tools
WARNING
Risk of injury!
Rotating drives, tools or accessory
parts may cause injury.
Keep hands, hair, clothing and
▶
utensils away from rotating parts.
Only attach and remove tools and
▶
accessories once the drive has
stopped and you have unplugged
the appliance.
Basic operation en
35