Troubleshooting; Fault Causes And Remedies - Silvercrest SKHO 40 A1 Bedienungsanleitung

Troubleshooting

Fault causes and remedies

If you cannot connect the headphones to a Bluetooth
playback device, proceed as follows:
♦ Make sure that the Bluetooth
playback device.
♦ Make sure that the audio cable
7
socket
connected, the Bluetooth
deactivated.
♦ Check that the headphones are switched on.
♦ If you use several Bluetooth
that any previous connection is disconnected. There may be a
previously paired playback device still within range.
♦ Make sure that the headphones are no more than 10 metres
from the playback device and that no obstacles or electronic
devices are placed between them.
NOTE
► In an environment with high-frequency interference, you may
experience noise interference during music playback via
Bluetooth
playback should automatically continue in Bluetooth
without any further problems.
│ GB │ IE
■ 44
of the headphones. When an audio cable
. As soon as the interference has ceased, music
®
function is activated on the
®
w
is connected to the AUX IN
function of the headphones is
®
playback devices, ensure
®
-compatible
®
w
is
mode
®
SKHO 40 A1