System Requirements - i-tec TB3HDMIDOCKPLUS Gebrauchsanweisung

Rear panel:
7. 3x USB-A 3.0 port - super speed data transfer (5 Gb / s), supports USB Hot
Swapping function
8. Ethernet GLAN RJ-45 port - supports 10 / 100 / 1000 Mb / s
9. Thunderbolt™ 3 data port - for connection of the Thunderbolt™ 3 / USB-C device to
the docking station. Another Thunderbolt™ 3 monitor with resolution of up to 5K can
be also connected.
10. Thunderbolt™ 3 data port / Power Delivery - for connection of the docking station
to the Thunderbolt™ 3 port of your laptop or for connection of the Thunderbolt™ 3 /
USB-C device to the docking station; this port supports a Power Delivery function
on profile 5, max. 85.0W.
11. HDMI port - 4K Ultra HD resolution up to 4096x2160@60Hz
12. Power Jack for a power supply adapter (DC 20.0V / 9.0A)
External power supply exclusively for use with TB3HDMIDOCKPLUS.
Other specifications:
• Dimensions: 229 x 87 x 27 mm
• Weight: 457 g

SYSTEM REQUIREMENTS

Hardware requirements: Laptop / tablet with a free Thunderbolt™ 3 port
Operating system: Windows 10 32/64 bit, macOS Sierra 10.12 and later
Windows 10 and macOS – automatic installation of OS drivers.
CONNECTING THE HDMI / THUNDERBOLT™ 3 MONITOR
For connection of the monitor to the docking station, use a HDMI / Thunderbolt™ 3 cable
(for HDMI, we recommend a cable of 2.0 version and higher). During the installation of an
additional monitor, the laptop / tablet monitor may blink, this is a normal state. Docking
station supports up to two monitors.
Graphic Interface: 1x HDMI and 1x Thunderbolt™ 3 port. Resolution:
1 monitor connected via a Thunderbolt™ 3 cable - resolution up to 5K
5120x2880@60Hz; HDMI at 5K resolution will be automatically disconnected
2 monitors connected simultaneously (1x HDMI + 1x Thunderbolt™ 3 port),
resolution up to 4K 4096x2160@60Hz
Quick Start
| 5
ENGLISH