Whirlpool T1400 Handbuch Seite 20

6.3 First daily use
Visualization What to do and what happens
Azionare l'interruttore a muro.
Open the door, insert the overflow pipe, verify filters are
well located and close the door. Rotate main selector
on to Start, main switch will illuminate green.
Wait for push button to turn on green indicating
tank is full. Wait until the wash tank temperature reaches
55/60°C and rinse temperature reaches 80/85°C; at this
point the machine is ready for use.
Select the desired program by turning :
long cycle or speed cycle.
Push switch to start the washing process:
conveyor bar and wash pumps will start, rinse will start
automatically when baskets will pass the rinse area.
Remove from the dishes all food leftovers and grease
then place the items to be washed in the baskets. If the
tableware has been waiting a long time to be washed, it
will first to be soaked.
Introduce basket into the machine.
Caution: when the machine is functioning do not open
doors quickly
When the baskets are not removed, they continue
onward until they contact the end-travel micro switch
which automatically stops the bar movement and turns
off the rinse water. When the micro switch interrupts the
conveying bar movement, turn off the machine before
removing the cause of the stoppage.
To turn off the machine, whenever required or when the
work has been completed, press button located on
the control panel.
8