i-tec PCI-E USB 3.1 Card Gebrauchsanweisung Seite 7

Quick Start
Warning:
The card may only be installed by a professionally competent person or
professional service. ComDis, s.r.o. assumes no responsibility for any damage
caused by improper mounting and installation of this equipment.
DRIVERS INSTALLATION FOR WINDOWS 10 / 8.x / 7 / VISTA, SERVER 2008
R2 32/64- BIT
1. Insert CD with supplied drivers and start the installation (Start-Continue).
2. Locate and run Setup.exe file from the directory: CD:\PCE2U31AC\
3. Confirm your instructions and wait for the installation to complete.
4. After connecting the USB device use the drivers supplied with the USB device.
EN
06