Milnor 36021 Bedienungsanleitung Seite 27

Table 6: Motor Grease Schedule. Use the data in
Motor Identification
(example: main drive)
Table 7: Mechanisms and Settings
Make sure mechanisms are serviceable and settings are correct to prevent unsatisfactory
Mark
Do this each
1 2 3 4 5 6
x 2400 hours
x 200 hours
x 200 hours
Section 3.1.4.3
Interval Quantity
Years Hours fl oz mL
performance.
Component
controller circuitry
water pressure regulator for
optional supply injector
bath level sensor that uses air
pressure
23
Chapter 3. Routine Maintenance
to complete this table.
Dates When Grease is Added
More Data
Examine wiring and connections in electrical
boxes. Look for corrosion, loose connections.
See Section 3.1.3
See Figure 10. Value: 28 PSI (193 kPa).
Examine the air tube and connections. See
Figure 11
PELLERIN MILNOR CORPORATION
.