Cleaning The Filters - Gtech AirRAM AR29 Betriebsanleitung

Cleaning the filters -

Holding onto the AirRam with one hand,
pull the bin handle and lift the bin out of
the AirRam.
Remove the filter from the inner shroud,
by twisting and pulling.
Tap the inner shroud over a bin to remove
any excess dirt.
10
do this once a month or more frequently depending on use.
Pull the filter out of the filter housing.
Tap the dirt from the filter and tip any
dirt from the filter housing.
Wash the filter if necessary.
Wash the filter under a tap. Squeeze out
any excess water then let it dry completely
before reinserting into the AirRam.
Recommended water temp 40ºC/104°F,
do not use detergent. Never put bin back
without filter inside. You could damage
the motor.