Overview Of Comfort Control Unit; Technical Data; Mounting The Comfort Control Unit - Marquardt Just Drive Comfort 4313 Serie Inhaltsempfehlung Für Bedienungsanleitungen

3

Overview of Comfort control unit

Switch the pedelec on and off at the Comfort control unit. Use the two keys and the joystick to
activate and control support from the electric motor or switch on the headlights.
The Comfort control unit's display shows the current driving speed. You can also see which sup-
port level is active, how long the power for the support motor will last, the charge level of the
battery and whether the light is switched on. You can also view the trip kilometers, average
speed and maximum speed for the current tour. The Comfort control unit also displays the total
mileage of the pedelec and the maximum speed over the entire distance.
3.1

Technical data

Comfort control unit
Length x width x height
Operating temperature
Storage temperature
Protection class
ESD model
USB interface
USB charging function
CAN Interface ISO 11898-5
4

Mounting the Comfort control unit

The Comfort control unit can be mounted on the left or right handlebar side. The protruding
page faces inwards. It is not above the handlebar grips. Position the control unit close to the
handle. All keys must be easy to operate with your thumb.
6
Check the fastening screws at regular intervals. Shocks, heat and cold may
cause the screws to loosen.
Tighten all screws to the required torque.
1. Unscrew the hexagon socket screw with a hexagon socket SW 2.5 on the bracket of the
control unit. Open the mounting bracket.
2. Position the control unit on the left-hand side of the handlebar.
3. Position the connecting cable in the control unit bracket. It must lie in the guide troughs
on the inside of the bracket and be guided through a recess in the bracket to the con-
nection.
4. Close the bracket. Pay attention to the connecting cable.
The connecting cable must not be crushed by the bracket.
72.8 x 50.2 x 44.6 mm
-10 °C to 45 °C
-20 °C to 85 °C
IP65 (HMI) dustproof, water spray proof
Human Body Model (HBM)
Micro USB Standard 2.0 Full Speed
USB Battery Charging Standard BC1.2 Max. 1.0 A
High-speed CAN
Just Drive Comfort control unit for pedelecs and e-scooters