Times Schedules - Airzone RADIANT365 Bedienungsanleitung

Information. This parameter provides information on:
• Zone: firmware, zone, association, actuator or status of the communications.
• System: firmware, settings and information about the system controllers.
• Devices: It displays the elements connected to the system.
• Webserver: How to configuration and how to associate it, IP address and MAC address.
ES
• Errors: Warnings on system incidents.
EN

Times schedules

If you press the time schedule icon, you will access the menu where you can schedule up to 24 time schedules per zone:
FR
IT
PT
DE
To create a new schedule, press
1. Select the type of time schedule to apply and press confirm.
• Mode. Allows to choose the operation mode (only available for Blueface Master thermostat).
• Temperature. Allows to select the set-point temperature.
2. Select the days of the week, time and action to perform.
3. Press confirm.
To activate/deactivate or modify a schedule, press the desired schedule to access the edit setting and then press the On/Off
selector or parameters to modify. Press and hold on any schedule to see all the available settings:
Edit: Changes the name of a schedule.
To edit the name of a schedule, press and hold the name of the zone to access the name editor. Then, change the name.
Keep in mind: If a wireless zone is renamed, the name will be displayed in the wireless controller after 5 minutes of inactivity or
after the first touch, whichever occurs first.
Delete: Deletes an existing schedule.
Copy: Copies a schedule to apply it in any other zone.
When activating a schedule, the schedule icon is displayed
visible and the icon will be crossed out
If you create Airzone Cloud calendar schedules, in the event of conflict these schedules have priority over
those created for each zone and the configuration of each zone is disable in the thermostat. The priority set
for time schedules is:
Calendar schedules > system schedules > zone schedules
24
and follow the next steps.
. If the schedules are deactivated, the list of schedules will remain
.
Add. Create schedule
Activate/Deactivate time schedules
Mode schedule
Temperature schedule