Screensaver; Basic Use Of The Think Thermostat; Adjusting The Temperature - Airzone ZS6 Bedienungsanleitung

SCREENSAVER

The screensaver activates after about 12 seconds of inactivity, displaying the following information:
Date. Displays the date of the system. It is defined by the Blueface Thermostat in user settings.
Zone Status. It displays information about the status of the zone: the state (on/off) and the user mode. In case of failure, it also
displays all the errors.
Airzone. A button to confirm, return to home screen and to switch between the heating set point and cooling set point.
When the screensaver is active, press the Airzone icon to get to the home screen.

BASIC USE OF THE THINK THERMOSTAT

Adjusting the temperature

On/Off. Press to turn the zone On/Off.
Temperature Control. The temperature displayed on the screen is the current set point temperature. Adjust the set point
temperature on the Think Thermostat following the next instructions:
Select the set point temperature using the control bar (by pressing or by sliding) to manually adjust by increments of 0.5ºC.
Press once to adjust the set point temperature by increments of 0.5º C, slide to adjust the set point temperature in larger
steps.
The permitted temperature range is:
Heating mode: 15º C 29º C.
•
Cooling mode: 18º C 30º C.
•
Note: Press the Airzone button to switch between heat and cool set point temperatures.
There is a minimum difference allowed between heating and cooling set point temperatures. The system will prevent
setting a temperature within the protection range.
Date
Zone Status
Home screen/
Heat/Cool Set Point
Temperature/ Confirm
27
ES
EN
FR
IT
PT
DE