Energy Saving; Cleaning & Maintenance - Bosch I8 VarioComfort TDS80 Serie Gebrauchsanleitung

5. Energy saving

If the energy saving setting is selected, you can save energy
and water and still achieve good results when ironing most of
your garments.
1 Press the energy saving button "Eco" (5). The indicator light
will come on.
2 To switch back to the normal energy setting, press the
"Eco" button again. It is advisable to use the normal energy
setting to get optimum results on thick and very wrinkled
fabrics.
Tips to help you save energy:
• If you tumble dry your fabrics before ironing them, set the
tumble drier on the iron dry programme.
• Try to iron the fabrics while they are still damp and reduce the
steam setting. Steam will be generated from the fabrics rather
than the iron.
6. Auto switch off
For your safety and to save energy, the appliance switches off
automatically when it has not been used for 8 minutes.
The illuminated ring around the programme selector (1) will flash
when auto shut-off has been activated. At the same time, three
beeps will be heard.
1 To switch the steam station back on, press the steam
release button (14) again.
Cleaning & Maintenance
1. Descaling process
Important: to keep your appliance in good condition for a
long time, you should carry out the descaling process after
a period of use. The "Calc'nClean" indicator light (3) will
flash and three beeps will be heard, indicating that the
process should be performed. You may continue ironing,
but before the next use and when the appliance is cold,
perform a descaling process.
* Model dependent
3x
3x
BOS CH
21