Safety Information; Symbols Used In The Instructions; Symbols On The Device - Parkside PHA 12 B2 Originalbetriebsanleitung

Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can only be operated with
the following rechargeable batteries:
PAPK 12 A1, PAPK 12 A2, PAPK 12 B2.
This type of battery may only be charged
with the following chargers: PLGK 12 A1,
PLGK 12 A2.
Levels of noise and vibration were deter-
mined according to the norms and regula-
tions in the declaration of conformity.
The vibration emission value has been mea-
sured according to a standardised testing
method and may be used for comparison
with another power tool.
The indicated vibration emission value may
also be used for an introductory assessment
of the exposure.
Warning: The vibration emission
value whilst actually using the power
tool may vary from the given values
regardless of the type and way in
which the power tool is used.
Try to keep the exposure to vi-
brations as low as possible. An
example of a measure to reduce
vibration exposure is limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the power tool is switched off
and times when it is switched on
but running without any load).

Safety information

This section describes the basic safety rules
when working with the device.
Symbols used in the
instructions
Hazard symbol with infor-
mation on the prevention of
personal injury or property
damage.
Hazard symbol with information on
damage prevention.
Advisory symbol with information on
how to best use the device.

Symbols on the device

Attention!
Read the operating instruc-
tions carefully before using
the device.
Wear safety goggles.
Wear a respiratory mask.
Wear safety gloves.
Scale, cutting
depth adjustment
Direction of travel of pla-
ner blade
Electrical devices must not
be disposed of with
domestic waste.
The device is part
of the Parkside
X 12 V TEAM series
GB IE
21