Storage - Parkside PAH 1700 C3 Originalbetriebsanleitung

Clean the product with a dry cloth . Use a
¾
soft brush for areas that are hard to reach .
In particular clean the air vents after every
¾
use with a cloth and soft brush .
The air vents must always be clear .
¾
Clean the chisel holder 11 regularly . Pull
¾
off the dust cap 10 . Lightly grease the chisel
holder .
NOTE
Do not use chemical, alkaline, abrasive
u
or other aggressive detergents or
disinfectants to clean this product as they
might be harmful to its surfaces .
˜ Maintenance
Before and after each use, check the product
¾
and accessories (e . g . accessory tools) for
wear and damage . If required, exchange
them for new ones as described in this
instruction manual . Observe the technical
requirements (see "Technical data") .
Greasing: Use the hex key 15 to loosen
¾
the 4 screws to remove the grease cap 1 .
Check if the product requires greasing . Top
up with grease 14, if necessary (Fig . H) .
The carbon brushes 16 must be replaced
¾
by the customer service or by a qualified
person .
˜ Repair
This product does not contain any parts that can
be repaired by the user . Contact an authorised
service centre or a similarly qualified person to
have it checked and repaired .
m
WARNING! RISK OF INJURY!
If the power cord is damaged, it must be
u
replaced by the manufacturer, its service
agent or similarly qualified persons in
order to avoid a hazard .
˜ Storage
Switch off the product and disconnect it from
¾
the mains . Let the product cool down .
Clean the product as described above .
¾
Store the product and its accessories in a
¾
dark, dry, frost-free, well-ventilated place .
Always store the product in a place that is
¾
inaccessible to children . The ideal long term
storage (longer than 3 months) temperature
is between +20 and +26 °C .
Store the product in its carrying case 17 .
¾
˜ Transportation
Switch off the product and disconnect it from
¾
the mains . Let the product cool down .
Transport the product in its carrying case 17 .
¾
Protect the product from any heavy impact
¾
or strong vibrations which may occur during
transportation in vehicles .
Secure the product to prevent it from slipping
¾
or falling over .
GB/IE 29