Switching On / Off / Selecting The Temperature; Temperature Levels; Selecting The Automatic Switch-Off Time - Silvercrest SWUB 85 D3 Bedienungsanleitung Und Sicherheitshinweise

Ensure that the heated underblanket is completely
flat and that it does not become drawn together
or folded during use.
Before use on an adjustable bed, verify the
heated underblanket and the cables will not be
pinched in the hinges, for example, or pushed
together.
Switch the heated underblanket on approxi-
mately 30 minutes before going to bed and
cover it with the top sheet and other bedding.
By doing this you will keep all the heat in.
Switching on / off / Selecting
the temperature
Switching on:
Using the temperature setting switch
control unit , set the temperature to setting
1
1, 2, 3, 4, 5 or 6 to switch on the heated under-
blanket. The function indicator
Switching off:
Using the temperature setting switch
control unit , set the temperature to setting 0
1
to switch off the heated underblanket. The
function indicator
2
Selecting the temperature:
This heated underblanket has a rapid heat-up
feature. Set the control unit to the highest tem-
perature setting (setting 6). This will cause the
heated underblanket to warm up quickly.
the heated underblanket for several
hours, we recommend setting the
control unit to the lowest temper-
1
ature to prevent the body from over-
heating, potentially resulting in burns
to the skin or heat stroke.
on the
3
illuminates.
2
on the
3
ceases to illuminate.
When operating

Temperature levels

Using the temperature setting switch
the control unit , set the temperature to the
1
desired temperature setting (see Fig. A).
Setting 0: Off
Setting 1: Minimum heat
Settings 2–5: Customised heat
Setting 6: Maximum heat
The foot zone is the warmest part of the heated
underblanket.
Note: This heated underblanket has overheating
protection. After a period of approx. 3 hours at tem-
perature settings 5 or 6, the heated underblanket
automatically switches down to setting 4.
Selecting the automatic
switch-off time
Using the switch-off time setting switch
the control unit , set the desired switch-off
1
time. The switch-off time can be set to 1, 3, 6 or
12 hours. After the expiry of the set switch-off
time, the heated underblanket no longer provides
heat and the function indicator
To heat up the heated underblanket again, first
set the temperature setting switch
0 and then choose the desired temperature
setting.
If the heated underblanket is no longer
being used after the timer expires:
– switch off the heated underblanket (setting 0),
– unplug from the socket,
– disconnect the plug-in connection
control unit , from the heated underblanket.
1
Preparations for use
on
3
on
4
starts to flash.
2
to setting
3
, thus the
5
GB/IE 21