Optional Equipment - Motorola PMPN4156 Schnellstartanleitung

OPTIONAL EQUIPMENT

A wall mount bracket (Part Number BR000270A01) is available for the Multi-Unit Charger
(MUC). Contact your local dealer to order this item. Installation of the wall mount bracket is
as follows:
• This wall mount bracket should be installed by a trained and experienced
technician. Having the product installed by a non specialized technician is
! !
very dangerous, and can cause damage or injury.
• Do not install the product where the weight cannot be supported. If the
strength of the location where the wall mount is installed is not strong
W A R N I N G
enough, it can fall off and cause an injury.
• Do not install on a structure that is prone to vibration, movement, or
chance of impact.
Figure 3: Mounting Multi-Unit Charger to Wall Bracket
1. Position the wall mount bracket in the desired position, and mark the location of the
mounting holes on the wall surface.
.
Ensure the area behind the mounting surface is always free of electrical wires,
cables, and pipes before cutting, drilling, or installing the mounting screws.
2. Mount bracket to wall using the appropriate mounting hardware required for the type of
wall material fixture it is being mounted to. Drill based on the marked mounting holes on
the wall surfaces.
Attach to
wall in four
locations
Wall
Wall
7