Technical Data; Spdif Out - AEG CTV 2201 Bedienungsanleitung

Problem
Only one sound channel.
Good image, but no sound.
TV set turns off.
No response to buttons;
Teletext rolls.

16. TECHNICAL DATA

Electrical data
Power supply:
Power consumption max.:
Power consumption in standby mode:
Screen
Screen diagonal:
Aspect ratio:
Resolution:
Audio
Audio output:
Reception
Channel options:
Channels:
TV system:
Inputs
Euro-AV:
AV:
PC:
Component:
SPDIF out (digital audio);
HDMI:
Antenna:
Remote Control
Batteries:
LED class:
General
Dimensions (W x D x H):
Weight:
Operating temperature:
Manual ID:
Subject to changes without prior notice.
36
Possible cause/solution
Check balance settings in VIDEO menu.
Check if the sound is muted?
Press MUTE.
Check if the sound is set very low?
Press VOL +.
Check if the off timer is activated if no channel is received?
Turn the TV set off at the main switch and turn on again after a
moment.
Input: 00 - 240 V ~ 50/60 Hz
65 W
<  W
22" /56cm
6:9 (4:3 selectable) + Zoom +2
920 x 1080
2 x 3 W
00
VHF band I channel2 - 4
VHF band III channel 5 - 2
UHF channel 2 - 69
PAL B/G, D/K, I / SECAM B/G, D/K, L, LL
SCART
1 x RCA /  x S-Video
 x VGA D-SUB /  x PC audio stereo jack
Y Pb Pr

SPDIF out

HDMI
75 Ohm
2 x type LR03/AAA

530x 97 x 394 mm (incl. foot)
approx. 5.7kg
0°C - 35°C
E4456/PE/2009