Dometic SINEPOWER MSI912 Montage- Und Bedienungsanleitung Seite 31

SinePower
LED display
Constantly lit
13 Warranty
The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the
addresses) or your retailer.
For repair and guarantee processing, please include the following documents when
you send in the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
14 Disposal
➤ Place the packaging material in the appropriate recycling waste bins wherever
possible.
M
If you wish to finally dispose of the product, ask your local recycling centre
or specialist dealer for details about how to do this in accordance with the
applicable disposal regulations.
EN
Cause
Short circuit or reversed
polarity
Excessive load
Remedy
Switch off the inverter and remove the
load.
Then switch the inverter back on without
the load. If no excessive load is now
shown, then there is a short circuit in the
load or the total load was higher than the
power specified on the data sheet.
MSI1812T, MSI1812TOE and MSI1824T:
The fuse in the device must be pressed in
again by hand after it is triggered.
Check the cables and connections.
Warranty
31