Rating Plate; Operation And Handing; Operating Instructions; Removing The Vacuum Chamber - CASO DESIGN VC250 Original Bedienungsanleitung

H Indicator lamps Selectable welding time (trocken & feucht)
Indicates the welding time chosen either for dry (trocken) or moist (feucht) vacuum food.
I Button selectable welding time (trocken & feucht)
With this function you could adjust the welding time to the consistency of your vacuum
food. Choose "trocken" for dry vacuum food and "feucht" for moist vacuum food where
liquid is produced. Please choose the corresponding sealing time before the vacuum
process.

15.3 Rating plate

The rating plate with the connection and performance data can be founded on the back of
the device.

16 Operation and Handing

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:

16.1 Operating Instructions

After each sealing session and before starting up, check to make sure the unit and all
accessories that come in contact with the foodstuff are thoroughly clean. Follow the
cleaning instructions at chapter "cleaning".

16.2 Removing the vacuum chamber

1. Shift the vacuum chamber and take it out completely.
2. Place the chamber back in the recess.
Step 1: Open the lid and place an open side of the bag in
the vacuum chamber.
Step 2: Press the cover down
Step 3: Press for release (after sealing process)
38