Fault
The light does not function.
Temperature display for
the refrigerator
compartment flashes.
Fig. "/4
The "cool-fresh"
compartment is too warm or
too cold.
Possible cause
The LED light is defective.
Appliance was open too
long.
Light is switched off after
approx. 10 min.
Appliance opened
frequently.
Too much food was placed in
the compartment.
The airing and ventilation
openings are blocked.
The standard setting has
been set too high or too low
(e.g. if there is frost
in the "cool-fresh"
compartment).
Remedial action
See chapter "Light (LED)" section.
When the appliance is closed and opened,
the light is on again.
Do not open the appliance unnecessarily.
Before placing food in the freezer, press the
super button 2.
Remove obstacles.
The temperature in the "cool-fresh"
compartment can be set to be 2 steps warmer
and/or colder, Fig. ". If the refrigerator
compartment temperature is set to 4,
the "cool-fresh" compartment has
a temperature of almost 0 °C.
1. Press super button on refrigerator
compartment 2 for 3 seconds until a signal
sounds.
Temperature display on refrigerator
compartment 4 flickers.
2. Change the setting using the temperature
setting button on refrigerator
compartment 3.
Setting 2 – coldest setting
Setting 8 – warmest setting
The set temperature is saved after one
minute.
en
35