SELFSAT CAMP38 Bedienungsanleitung Seite 8

2. Set Skew angle back to 0°.
4. Down the antenna to the ground fully
Down the antenna to the ground fully with pole
(Do not pull down the antenna by holding elevation screw cap and skew screw cap)
Do not push up the antenna by holding elevation control knob and skew control knob.
5. Adjust azimuth
85
Return the antenna to home position.
Elevation indicator has to be faced to the center of vehicle rear to confirm that the azimuth is adjusted
to right direction. (HOME position)
3. Set elevation back to 90°.
CAMP38 / CAMP58 User manual - 7
Eye viewpoint