Picture / Sound Settings; Picture Settings - Grundig 50 GUB 7040 Benutzerhandbuch

PICTURE / SOUND SETTINGS

Picture settings

1
Press » «.
>
2 Press » « to select »Settings«.
3 Press » « and then »
V
& Sounds«, and confirm with »
4
Select »Picture Settings« and confirm with
» «.
– »Picture Settings« menu will be displayed.
PICTURE SETTINGS
HDMI1
HDMI2
Picture Settings
HDMI3
Aerial
Satallite
5
Press » « or »
V Λ
which you want to configure the picture
settings and press »
6 Select the desired line/function with »
» « and press »
Λ
Select the option with »
» « to return to the »Picture Settings«
menu.
Note:
Other settings are available under
7
»Advanced Settings«.
7
Press » « to select »Advanced Settings«
V
and press » « to confirm.
8 Select the desired line/function with »
» « and press »
Λ
Select the value/option with
press » « to confirm.
Press » « to return to the »Picture Settings«
menu.
9
Press » « to go to the previous menu or
press » « to return to »Home« menu.
>
« to select »Display
«.
« to select the source for
« to confirm.
V
« to confirm.
< >
« or » « and press
V
« to confirm.
< >
« or » « and
---------------------------------------------------------
Enhanced picture settings
The "Enhanced picture settings" are in principal
digital image improvements which, however,
should be only used when necessary when
picture quality and transmission are excellent.
They may well improve the display with poor
material, but may adversely affect the display
where transmission and picture quality are
excellent.
»Vibrant Colour« – Increases the color
7
contrast and the contrast adjustment. This
setting is mostly too strong for use with
normal pictures and should only be used
where necessary (low or off). Otherwise,
nuances in the image can be suppressed.
»Gamma« – This setting determines which
7
brightness value should be displayed for
which digital transmission value. Most
recordings are transmitted with a gamma
value of 2.2 (all Windows PCs and
newer PCs with a MAC operating system
work with this; older MAC systems and
transmissions without a colour profile mostly
operate with a gamma value of 1.8).
« or
»Dynamic Contrast« – This function
7
dynamically and optimally adjusts the
contrast for the respective picture content
by analyzing images and then altering this
depending on a change in contrast. This
increase in the contrast however may also
reduce the visible brightness levels in the
picture.
»Perfect Clear« – Improves the general
7
image by means of a gentle blue hue
« or
(giving the appearance of greater
sharpness) and improves the black level by
setting it entirely to black from a specific
shade of back. This reduces the visible grey
values in the dark areas of the picture.
ENGLISH
23