Technical Data - rawlink 79476 Gebrauchsanweisung

2-IN-1 CREEPER AND STOOL

Technical data

Max. weight, stool:
Max. weight, creeper:
Package contents/parts
7
6 5
• 2-in-1 creeper & stool
– Padded upper frame (1)
– Padded middle frame (2)
– Padded lower frame (3)
– 6 x swiveling wheels (4)
– Safety hole (5)
– Locking pin (6)
– Safety hook (7)
• Assembly materials:
14
120 kg
150 kg
1
4
Assembly
Note: Place all product parts and the
assembly materials on a blanket or similar
surface to protect the ground and the
product from scratches.
• Place the lower frame (3) and middle
frame (2) on the ground with the bottom
side down.
• Slide the middle frame (2) between the
steel rails of the lower frame (3).
• Pull the locking pin (6) of the lower frame
2
(3) out as far as possible and slowly
release it again until it locks into the
safety hole (5) of the middle frame (2)
3
(see Fig. 1).
• Connect the lower frame (3) and middle
frame (2) using the screws (A), washers
(D) and locknuts (C) (see Fig. 1).
2
5
6
• Turn the assembled frames around so
that the top side is facing the ground.
• Slide the upper frame (1) between the
steel rails of the middle frame (2).
3