Kenwood SB260-Serie Bedienungsanleitungen Seite 3

key
stirrer
cap
lid
goblet
handle
tap assembly - tap lever
tap assembly
sealing ring
blade assembly
power unit
cord storage
to use your smoothie
blender
1 Fit the sealing ring over the blade
assembly.
2 SB260 series
Screw the blade assembly onto the
goblet.
SB270 series
To fit the blade assembly to the
goblet, line up the
the blade assembly with the
symbol on the goblet. Then turn to
the symbol to lock into place.
3 Screw the tap assembly onto the
goblet. Check that the dispensing
tap lever is in the off position
4 Place the assembled goblet on the
power unit.
5 Place the liquid ingredients into the
goblet.
This includes fruit (not frozen), fresh
●
yoghurt, milk and fruit juices. These
can be placed into the goblet to the
level marked LIQUIDS for either 2 or
4 servings.
6 Add ice or frozen ingredients to the
goblet.
This includes frozen fruit, frozen
●
yoghurt, ice cream or ice. These can
be added up to the level marked
FROZEN INGREDIENTS for the
corresponding number of servings.
- tap body
symbol on
.
7 SB260 series
Screw the lid onto the goblet.
SB270 series
Push the lid onto the goblet.
8 Either push the cap into the lid or
place the stirrer in the hole.
The stirrer can be used when
●
blending thick mixtures or when
large quantities of frozen foods with
liquids are used.
9 Plug in. (SB270 series - the base will
illuminate).
10 Press the low ' ' button for up to 30
seconds, this is to start the mixing
process, then press the high ' '
button. Allow the ingredients to
blend until smooth.
Use the stirrer by moving it in an anti
●
clockwise direction.
11 Place a glass underneath the tap,
press the low ' ' button and pull
forward the dispensing tap lever.
Thinner drinks may dispense without
●
having to switch on the power unit.
Use the stirrer to assist when
●
dispensing thick smoothie drinks.
To help dispense the last amount of
●
a thick smoothie drink, add a few
tablespoons of liquid to increase the
flow.
When the glass is full, switch off and
●
release the lever. Unplug after use.
OR
Switch off ' ', remove the goblet
and pour the drink. Unplug after
use.
hints
To make a thinner smoothie drink
●
add more liquid.
To make a thicker smoothie drink
●
add more frozen ingredients but do
not exceed the frozen limit marked
on the goblet.
Before fitting the lid, push the solid
●
ingredients into the liquid using the
stirrer.
Use the pulse 'P' button to operate
●
the power unit in a start stop action
to control the texture of your drink.
Take care as this automatically
selects the higher speed and may
cause the drink to be thrown up the
sides and onto the lid of the goblet.
3