Safety Instructions - ims PRO POWERDUCTION AUTO Bedienungsanleitung

Translation of the original instructions

SAFETY INSTRUCTIONS

This manual contains safety and operating instructions, to be fol-
lowed for your safety. Please read it carefully before using the
device for the first time and keep it in a safe place for future refe-
rence. Read and understand the following safety recommenda-
tions before using or servicing the unit. Any change or servicing
that is not specified in the instruction manual must not be underta-
ken. The manufacturer is not liable for any injury or damage
caused due to non-compliance with the instructions featured in this
manual . If there is any issue or uncertainty, please consult a qua-
lified individual to operate the equipment correctly. This machine
may only be used to heat ferrous materials within the limits indica-
ted on the equipment and manual. The operator must observe the
safety precautions. In case of inedaquate or unsafe use, the manu-
facturer cannot be held liable for damage or injury. Any other
uses not specified in this manual is forbidden, and possibly dange-
rous.The product is semi automatic and requires the presence of
an operator.
This unit can be used by children aged 8 or over and by people
with reduced physical, sensory or mental capabilities or lack of
experience or knowledge, if they are properly monitored or if ins-
tructions for using the equipment safely have been read and risks
made aware of. Children must not play with the product. Cleaning
and maintenance should not be performed by an unsupervised
child.
Do not use the charger if the mains cable or plug is damaged.
Do not cover the device.
Fire and explosion risks!
• Do not use the device in an explosive atmosphere.
• Keep gas cannisters or other pressurised gas containers away
from the induction heating machine.
Warning, heat and flame risk.
• Do not overheat parts and adhesives.
• Be wary of fire, keep a fire extinguisher is in the vicinity..
• Do not position the machine on, or near flammable surfaces.
• Do not position the machine near flammable materials.
Warning ! Very hot surface. Risk of burns.
• The parts and pieces that have just been heated are hot and
may cause burns when manipulated.
• Do not touch any hot parts with your hands.
• Wait for the parts and pieces to cool down before handling
them.
• Check that jewellery (such as wedding rings) or other metal
pieces do not get close to the induction heating machine or
the inductor when switched on.
• Remove any jewellery or any metal object from yourself before
using this machine
POWERDUCTION AUTO EN
13