Cleaning And Storage; After Use - Philips HR2831 Gebrauchsanweisung

- Switch on (fig. 22).
- Press the ingredients
downwards using the
pusher. Apply steady and
moderate pressure.
• Pre-cut large pieces to
make them feed into the
chute.
• Fill the food chute evenly
for the best results.
• Empty the bowl every now and then when
processing large amounts.
g
Tips - slicing
• Fill the opening completely while the motor is
standing still. Press with the pusher and switch on.
In this manner you prevent the ingredients from
turning over while slicing.
h
Tips - shredding
• Before shredding cheese, pre-cut it into small cubes
(approx. 2 cm).
Apply light but steady pressure on to the pusher.
It cannot be helped that the last piece of cheese will
remain between the cover and the disc.
• Ensure that hard cheese (e.g. matured gouda,
parmesan, pecorino) is at room temperature.
• Ensure that half hard cheese (e.g. new and semi
matured gouda, emmenthaler, gruyère) is as cold as
possible.
• If you wish long strings, place the ingredients
horizontally into the filling opening.
• Select I for optimal shredding results.

After use

23
- To release the motor unit and lid turn the control
1
ring to position (fig. 6-7).
- Lift the accessory and the coupler from the bowl
(fig. 23).
After that, you can empty the bowl.
- After slicing or shredding: release the insert from the
insert disc holder (fig. 24). Make sure the insert is
not pointing toward you while doing so. Take care:
the cutting edges are very sharp!
22
24

Cleaning and storage

• Always remove the mains plug from the wall socket
before cleaning the motor unit. The motor unit may
be wiped with a damp cloth.
Never immerse the motor unit in water. Never pour
water over it.
• Wash the items which have been in contact with the
food in warm soapy water immediately after use.
• Take care when cleaning the metal blade and the
inserts: the cutting edges are very sharp!
These items can also be cleaned in a dishwasher.
• Ensure that the cutting edges do not come into
contact with hard objects as this might make them
blunt.
25
• Place the protective cap back on to the metal blade
after cleaning (fig. 25).
• After cleaning, you can store the accessoiries in the
bowl. Place the lid and wind the cord as illustrated in
fig. 26, using the cord clip.
7
26