Cleaning The Edge-Cleaning Side Rotating Brush - Samsung SR8825 Benutzerhandbuch

Maintain tools and fi lter
CLEANING THE ROBOTIC VACUUM CLEANER

CLEANING THE EDGE-CLEANING SIDE ROTATING BRUSH

1. Check whether the side rotating brush is bent or
2. Wearing rubber gloves, wrap the side rotating brush with
3. Turning the side rotating brush, repeat the procedures
4. If hair or string is wrapped between the main unit and
NOTE
34_ Maintain tools and fi lter
Downloaded from www.Manualslib.com
You must turn off the Power Switch at the bottom of the
main unit before cleaning the robotic vacuum.
whether there are any foreign substances stuck on the
brush.
a cloth using hot water for about 10 seconds and wipe it
on the cloth.
in Step 2.
the side rotating brush, undo the screw of the side
rotating brush using a (+) driver to remove it.
When reassembling the brush, check the "L" mark
on the edge-cleaning side rotating brush and the "L"
mark on the main unit and then reassemble the side
rotating brush.
(Letter "R" is carved at the right side rotating brush.)
Because the side rotating brush easily attracts hair and other foreign substances,
make sure to clean it frequently.
Excessive foreign substances on the side rotating brush can damage the brush.
manuals search engine
L