During the pairing process,
on the display.
Pairing is complete once an acoustic signal
sounds. The external device can now be used
with the DAB radio.
If you would like to end Bluetooth
change the source on the radio.
You can control how tracks are played, the volume
and a range of special functions on your external de-
vice and on the DAB radio. What functions are avail-
able is dependent on your external device and the
software that you use.
•
Turn the
volume.
•
Press the
Use the PREV/NEXT buttons or turn the con-
•
troller to go back to the previous track or skip to
the next track.
18. Alarm
It is possible to set two alarms at different times. The
alarm will either trigger an alarm tone or switch on
the radio. You can also set the alarm so that it is acti-
vated daily or only on certain days.
92
SCANNING...
controller to increase or decrease the
controller to start or stop playback.
appears
®
transmission,