Operating The Appliance - VINCENT tubeLine DAC-7 Bedienungsanleitung

Operation
Switch on and off
Select input source
Switch between tube
amplification and
transistor amplification
Volume of the connected
headphones (7)

OPERATING THE APPLIANCE

Button(s) Description
The preamplifier is switched on and off using this button at the front panel.
It has no standby option. When switched off the device is internally sepa-
rated from the AC power. As a precaution, after switching on, the volume
POWER (2)
setting of the preamplifier should be reduced. After switching on, the devi-
ce needs up to 30 seconds before it is ready to operate. During power-on
mode, one of the LED for the input selection will be lighted.
With this button, you can select between four input sources (AES/EBU,
(3)
USB, Coaxial IN and Optical IN). By pressing this button, the player
SELECT
changes to the playback of the device connected thereto.
This switch allows you to choose if the converted music signal that is read
TUBE/FET
from the CD is amplified to the output level using the internal TUBE amplifier
(5)
or the internal FET transistor amplifier. This selection can only be made on the
front panel.
This function can only be operated on the front of the device. Turn the dial
"LEVEL" clockwise to increase the volume in the headphones and anticlockwi-
LEVEL (7)
se to reduce the volume. This volume control has no effect on the output level
of the analogue "ANALOG OUTPUTS" (8) on the back of the device.
Vincent
37