VINCENT solidLine CD-S5 Bedienungsanleitung Seite 39

Operation
Program the
playback order
Delete the selected
playing sequence
OPERATING THE APPLIANCE
ADVANCED PLAYBACK FUNCTIONS
Button(s) Description
With this function it is possible to set up a desired playing sequence of the
CD tracks. This also allows you to play a smaller selection of your own
choice from all the CD tracks. This programming can only be done with
the remote control. The "program" is set up by the following procedure:
• Press the PGM button.
• Enter the numbers of all the desired tracks one after the other on
PGM (26) the number pad (16) of the remote control. For track 10 use the
"10" button. For all other two-figure track numbers first press the
Number "+10" button as many times as necessary until the number of 10's
Keys is correct, then press the button for the last figure (for track 23
(16) press the "+10" button twice and the "3" button once).
• To confirm the program press "STOP"(8)(22) or "PLAY/PAUSE"
(7)(20).
The "REPEAT" play function (19) can also be applied to the programmed
track selection. You can see on the display (1) from the text "PGM" that a
program is active. It is only if you press "CANCEL" (25), eject the CD or
switch off the CD player that your own playing sequence is deleted.
This button deletes a program set up with the "PGM" function (26). If the
button is pressed during a pause, any created program will be deleted
CANCEL (25) and you can continue to play the current track and the remaining CD
tracks with "PLAY/PAUSE" (7)(20). Just as with the programming, this
action may only be performed with the remote control.
Vincent
39