Herunterladen Inhalt Inhalt Diese Seite drucken

Trusted Computing Enable; Aktivierung Der Enable-Einstellungen - Beckhoff CB7268 Originalhandbuch

Computerboard
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

BIOS
8.3.4

Trusted Computing Enable

                 Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
          Advanced
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│  TPM20 Device Found                                             │Enables or Disables BIOS        │
│  Firmware Version:                    403.1                     │support for security device.    │
│  Vendor:                              INTC                      │O.S. will not show Security     │
│                                                                 │Device. TCG EFI protocol and    │
│  Security Device Support              [Enable]                  │INT1A interface will not be     │
│  Acitve PCR banks                     SHA─1, SHA256             │available.                      │
│  Available PCR banks                  SHA─1, SHA256             │                                │
│                                                                 │                                │
│  SHA─1 PCR Bank                       [Enabled]                 ├────────────────────────────────┤
│  SHA256 PCR BAnk                      [Enabled]                 │><: Select Screen               │
│                                                                 │^v: Select Item                 │
│  Pending operation                    [None]                    │Enter: Select                   │
│  Platform Hierarchy                   [Enabled]                 │+/─: Change Opt.                │
│  Storage Hierarchy                    [Enabled]                 │F1: General Help                │
│  Endorsement Hierarchy                [Enabled]                 │F2: Previous Values             │
│  TPM2.0 UEFI Spec Version             [TCG_2]                   │F3: Optimized Defaults          │
│  Physical Presence Spec Verion        [1.3]                     │F4: Save & Reset                │
│  TPM 20 InterfaceType                 [CRB]                     │ESC: Exit                       │
│  Device Select                        [TPM 2.0]                 │                                │
│  Disable Block Sid                    [Disabled]                │                                │
└──────────────────────────────────────────────────────────────────────────────────────────────────┘
                  Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
 BIOS-Eintrag
 TPM20 Device Found
 Firmware Version:
 Vendor:
 Security Device Support
 Active PCR banks
 Available PCR banks
 SHA-1 PCR Bank
 SHA256 PCR Bank
 Pending operation
 Platform Hierarchy
 Storage Hierarchy
 Endorsement Hierarchy
 TPM2.0 UEFI Spec Version
 Physicasl Presence Spec Version
 TPM 20 InterfaceType
 Device Select
 Disable Block Sid

Aktivierung der Enable-Einstellungen

Mit „Quit without saving" und „Yes" führen Sie ein Reset durch und Aktivieren die Einstellungen. Beachten
Sie, dass nicht alle CPU's diese Funktion unterstützen.
34
 Optionen
 403.1
 INTC
 Enable / Disable
 SHA-1, SHA256
 SHA-1, SHA256
 Enabled / Disabled
 Enabled / Disabled
 None / TPM Clear
 Enabled / Disabled
 Enabled / Disabled
 Enabled / Disabled
 TCG_2 / TCG_1_2
 1.3 / 1.2
 Keine
 Keine
 Disabled / Enabled
HINWEIS
Version: 1.0
Computerboard

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis