Rehasense NAVIGATOR Air Bedienungsanleitung Seite 6

Adjusting the height of the forearm supports
- Disconnect the stabilizing straps
- Disconnect the backrest (4) in the middle
Release the height adjustment's locking knob
-
- Make adjustment of the forearm supports to your desired height.
- Tighten the knob.
- Adjust the backrest clamps (5) to the appropriate height of the backrest and tighten the bolts
- Reconnect both sides of the backrest (4)
- Reconnect the stabilizing strap (3), to ensure full rigidity and stability of the structure.
•
Both arm pads should be adjusted to the same height.
•
If the arm pads are correctly adjusted, the user must stand upright.
•
Always lock the stabilizing strap before applying load on the arm pads.
•
Failure to follow these warnings can result in personal injury.
Adjusting the length and angle of the push handles
Release the handle's length locking lever (2)
-
- Make adjustments to the desired length and angle, so it is easy and comfortable to hold the
handle.
- Tighten the lever.
05 / 2020 6/23 NAVIGATOR Air