Charging The Battery - Beurer AS 98 Gebrauchsanweisung

Tips for successfully pairing the activity sensor with your smartphone
• Position the smartphone as close as possible to your activity sensor.
• Maintain a distance of 30 m from other Bluetooth

5. Charging the battery

When the battery level indicator on the activity sensor shows an empty battery,
you need to charge the battery. To charge the battery, proceed as follows:
1. Turn on your computer and insert the USB plug of your USB charging cable
into the USB socket.
2. As shown, connect the magnetic fastening of the USB charging
cradle with your activity sensor. Ensure that the charging cradle
is positioned correctly. Only then will the battery be charged.
3. The current charge status is shown by the battery status indicator.
It usually takes approx. 2 hours to fully charge the battery. Once the
device's battery is fully charged, the following message appears on the
display.
sensors/devices.
®
44
AM
10
26
10628 88.8
KCAL
detecting
...
Aerobic Maximal
Phone
Danel
Call
Bluetooth Bluetooth
On Off
Beurer
V1.1
88.8 08 00
h m
KM
Good
OFF
Morning
Message
Danel
Battery
Low !