Automatic Updates; Further Functions And Notes - Canton Smart Soundbox 3 Kurzanleitung

English

AUTOMATIC UPDATES

After you have connected the Soundbox 3 to the network, firmware updates are
executed After each connection to the power supply and at regular intervals (also
in standby), Connect 5.1 searches for an update and installs it, if available. The LED
flashes green / red during the update and the display first shows „DOWNLOA-
DING", then „UPDATING". During this time the system is not ready for operation.
Attention:
• Do not disconnect the Soundbox 3 from the power supply during an update
process.

FURTHER FUNCTIONS AND NOTES

The Soundbox 3 contains a multitude of other great functions. All settings can be
found in the detailed instruction manual. These can be found under:
www.canton.de/manual/soundbox3
26