Rev 1.00
Downloaded from
www.Manualslib.com
Before You Begin
Please read this guide carefully
before you install the HC80, HC81, or
HC82 camera. Keep this guide for
future reference.
Unpack Everything
Check that the items received match those listed on the order form and
packing slip. The HC80/HC81/HC82 packing box should include, in
addition to this User Guide:
•
One fully assembled camera with factory installed video/power
cable
•
One hardware kit
If any parts are missing or damaged, contact the dealer you purchased
the camera from or call Honeywell Customer Service.
Equipment Required
•
A Phillips screwdriver may help you complete the installation.
•
Mounting screws are not supplied. Use mounting screws
appropriate to your particular installation.The holes on the mounting
plate are 3/16 inch in diameter. See "Mounting Templates" on
page 13.
manuals search engine
2
Document 900.0391
09/05