What Do You Do In Case Of Operating Malfunctions - Fagor 6h750nepoca Bedienungsanleitung

W
hat do you do in case of operating
If you have a doubt about the functioning of your oven, this does not
necessarily mean that there is a malfunction. In any event, check the following
items:
Y
ou observe that...
The oven is not heating.
The temperature indicator is
flashing.
The oven light is not working.
The pyrolysis cleaning cycle
does not begin.
Downloaded from www.Manualslib.com
malfunctions?
P
• The oven is not connected.
• The fuse in your electrical set-up
is not working.
• The selected temperature is too
low.
• The sensor is defective.
• The thermostat is faulty.
• The oven has experienced
overheating and has engaged
safety steps.
• Check the time on the clock and
the digital display (as described on
p.11)
• The door lock is faulty.
• Defective temperature sensor.
• The light is out of order.
• The oven is not connected or the
fuse is not working.
• The door is not properly closed.
• The locking system is defective.
• The
defective.
• The contact for "closed door"
detection is defective.
manuals search engine
ossible causes
temperature sensor is
W
hat should you do?
- Connect the oven.
- Replace the fuse in your electrical
set-up and check its capacity (16A).
- Increase the selected
temperature.
- Call the After-Sales Service
Department.
- Call the After-Sales Service
Department.
- Call the After-Sales Service
Department.
- Call the After-Sales Service
Department.
- Call the After-Sales Service
Department.
- Replace the light.
- Connect the oven or replace the
fuse.
- Verify that the door is locked.
- Call the After-Sales Service
Department.
- Call the After-Sales Service
Department.
- Call the After-Sales Service
Department.
EN
11