MSI 890GXM-G65 Serie Bedienungsanleitung Seite 44

▍
MS-7642 Manboard
▶
Ths feature s used to Integrate two 64-bt DCTs nto a 128-bt nterface.
▶
Bank Interleavng s an mportant parameter for mprovng overclockng capablty of
memory. It allows system to access multple banks smultaneously.
▶
Ths s a memory power-savng technology. When the system does not access mem-
ory over a perod of tme, t wll automatcally reduce the memory power supply.
▶
Ths settng allows you to enable/dsable the MemClk Trstatng durng C3 and
ATLVID.
▶ FSB/DRAM Rato
Ths tem allows you to select the rato of FSB/ DRAM.
▶ Adjusted DRAM Frequency (MHz)
It shows the adjusted Memory frequency. Read-only.
▶ Onboard VGA Core Overclock
Ths tem s used to enable/ dsable the followng tem "Adjust Onboard VGA frequen-
cy".
▶
Ths tem wll appear when Onboard VGA Core Overclock sets to [Enabled]. It allows
you to adjust the onboard VGA frequency.
▶ HT Lnk Control
Press <Enter> to enter the sub-menu.
▶
These tems allow you to set the Hyper-Transport Lnk wdth. Settng to [Auto], the
system wll detect the HT lnk wdth automatcally.
▶ HT Lnk Speed
Ths tem allows you to set the Hyper-Transport Lnk speed. Settng to [Auto], the sys-
tem wll detect the HT lnk speed automatcally.
▶ Adjusted HT Lnk Frequency (MHz)
It shows the adjusted HT Lnk frequency. Read-only.
▶ Adjust PCI-E Frequency (MHz)
Ths field allows you to select the PCIE frequency (n MHz).
▶ Auto Dsable DRAM/PCI Frequency
When set to [Enabled], the system wll remove (turn off) clocks from empty DRAM/ PCI
slots to mnmze the electromagnetc nterference (EMI).
▶ CPU VDD Voltage (V)/ CPU-NB VDD Voltage (V)/ CPU Voltage (V)/ CPU-NB Voltage
(V)/ DRAM Voltage (V)/ NB Voltage/ SB Voltage
These tems are used to adjust the voltage of CPU, Memory and chpset.
En-34
Downloaded from www.Manualslib.com
DCT Unganged Mode
Bank Interleavng
Power Down Enable
MemClk Trstate C3/ATLVID
Adjust Onboard VGA Frequency
HT Incomng/ Outgong Lnk Wdth
manuals search engine