AKG MicroMic III Serie Bedienungshinweise Seite 16

2
Fig. 3: Using the B 29 L to power the microphone.
Connecting the
Refer to fig. 3.
Disconnecting
Important!
Refer to fig. 3.
Balanced input:
Unbalanced input:
2.3.2 Using the
Connecting the cable:
Refer to fig. 4.
Disconnecting
16
Downloaded from www.Manualslib.com
2 Interfacing
B 29 L
4
1. Push the mini XLR connector (1) on the micro-
cable: phone cable into one of the two mini XLR
sockets on the B 29 L (2) to the stop.
The connector will lock automatically.
To disconnect the cable, press the unlocking
the cable: button on the mini XLR connector (1) and pull
the connector (1) out of the socket.
To avoid damaging the cable, never try to
pull out the cable itself!
2. Connect the B 29 L (2) to the desired input.
• Use a commercial XLR cable (3) to connect
• Refer to section 2.2.2 above.
1. Push the mini XLR connector (1) on the micro-
MPA III L phone cable into the mini XLR socket (2) on the
cable of the MPA III L (3) to the stop.
The connector will lock automatically.
the cable: Refer to section 2.3.1 above.
manuals search engine
1
3
the B 29 L (2) to a balanced input.
5