Chauvet DJ EZpin IRC Schnellanleitung Seite 4

EZpin™ IRC QRG
AC Power
Charging the
Battery
Battery Run
Time
IRC-6
(Infrared
Remote
Control)
This product has an external auto-ranging power supply that can work with an
input voltage range of 100 to 240 VAC, 50/60 Hz; it runs on 9 VDC, 1,000 mA.
The EZpin™ IRC comes with a rechargeable lithium battery for cable-free
operation. To charge the battery, simply plug in the external power cord at any
time before, during, or after operation. To charge the battery before or after
operation with the LED off, leave the power switch in the Off position. The
indicator light on the external power supply turns red while the battery is charging,
then it turns green when the battery is done charging.
For optimal battery life, charge the EZpin™ IRC battery 24 hours prior to
initial use.
Maximum Run Time
Up to 6 hours
The EZpin™ IRC is compatible with the IRC-6 from CHAUVET®. For
more information on the IRC-6 or to download instructions, go to
www.chauvetlighting.com.
4
EN
Recharge Time
3 hours