Getting Started; Charging The Battery - Kokido TELSA 90 Bedienungsanleitung

GETTING STARTED

Charging The Battery

IMPORTANT NOTE: Fully charge the pool vacuum (about 5-6 hrs) before using it
for the first time.
WARNING!
 Use only the original external adaptor and charging plug provided.
 Make sure the pool vacuum and the charging port are clean and dry before set-
up.
1.
Place the unit on a flat surface. Set the pool vacuum to Power Off/ Charging
Mode by turning the switching knob anticlockwise until it clicks and completely
exposes the charging port.
Align and attach the charging plug to the charging port. WARNING! Be sure
not to invert the charging plug and ensure both the charging plug and charging
port are clean and dry before charging them. TIPS: Use cotton bud to dry
the chaging port and pins.
Plug the charging cable of the external adaptor into the charging plug.
2. Connect the external adaptor to the power source. The indicator light on the
external adaptor will turn red when the vacuum is charging and green when it is
fully charged. Charge it for 6 hours for best performance.
RED light - Charging
GREEN light - Charged
9