Pedalboard Connection To Legend Classic - Viscount Legend Bedienungshandbuch

3.4 PEDALBOARD CONNECTION TO LEGEND CLASSIC

To connect the pedalboard supplied with the instrument, follow this procedure:
1.
Connect the [MIDI OUT] connector of the pedalboard to the [PEDALS KEYB ONLY] connector of the
instrument's rear connection panel (see par. 3.3) using ONLY the MIDI cable supplied with the pedalboard
or a cable with a 5-wires DIN connector.
2.
Connect the male jack of the EXPRESSION cable from the pedalboard to the female jack on the
EXPRESSION cable from the instrument.
3.
Connect the male jack of the ROTARY cable from the pedalboard to the female jack on the ROTARY cable
from the instrument.
This allows you to control the overall volume of the organ via the expression pedal and the speed of the Rotary
effect via the lever control located on the pedal itself. The operation of the lever is the same as that described
in point 3 / [ROTARY] of par.3.3.
NB
- Do not press the lever control located on the expression pedal when turning the instrument on.
Operation of the expression pedal and lever control is customizable. For more information see par. 6.7.
-
EXPRESSION ROTARY
EN - 15
EXPRESSION ROTARY
User Manual