Selecting Metering Modes - Mercury MoviePix M-330 Benutzerhandbuch

Recording a video clip (continued)

Selecting metering modes

Under normal condition, the light is automatically measured based on overall
lighting. If the subject of shooting appears too dark and the background too bright,
you can manually select a proper metering mode according to the subject's
position.
Pressing the Right ( ) button repeatedly
will switch the metering mode in the
following order:
g
Auto Average
g
Auto.
Auto mode (no indicator): When the
camera is in Auto mode, the camera will
automatically select the best metering
method for the overall conditions.
Average mode: When in Average mode,
the camera will measure the lighting
condition within the bracketed area.
Center mode: When under Center mode,
the camera will measure the lighting
condition within the central area.
Center-low mode: The camera will focus
the metering on the center-low area.
Downloaded from www.Manualslib.com
g g
Center Center-low
manuals search engine
1.0X 10
Auto Mode
1.0X 10
Center Mode
16
1.0X 10
Average Mode
1.0X 10
Center-low Mode